Busbar clamps

Busbar clamps for post insulators

  • The busbar clamps are used to mount busbars on post insulators. 
  • The busbars can be mounted vertical or horizontal
  • One or two busbars can be mounted next to each other
  • The busbars can be mounted in fixed or sliding configuration

Vertical support for busbar


- Fixed or sliding configuration
- 1 or 2 busbars
- Connection with stud M12
- A: 60mm, 80mm, 100mm, 120mm


- Fixed or sliding configuration
- 1 or 2 busbars
- Round connection with Dø: 108mm or 158mm and
Eø: 76 or 127mm
- A: 60mm, 80mm, 100mm, 120mm


- Fixed or sliding configuration, square clamp
- 1 or 2 busbars
- Round connection with Dø: 108mm or 158mm and
Eø: 76 or 127mm
- A: 60mm, 80mm, 100mm, 120mm

Horizontal support for busbar


- Fixed or sliding configuration
- 1 or 2 busbars
- Connection with stud M10
- A: 60mm, 80mm, 100mm, 120mm


- Fixed or sliding configuration
- 1 or 2 busbars
- Round connection with Dø: 108mm or 158mm and
Eø: 76 or 127mm
- A: 60mm, 80mm, 100mm, 120mm

Low cost vertical support for busbar

- Fixed configuration
-  2 busbars
- Connection with stud M12
- Height of busbar: from 50mm to 100mm

Busbar junction clamp


-Junction of 2 busbars
-A: 60mm, 80mm, 100mm, 120mm

Busbar clamps for low power

  • Used to support bars with a width of 5 mm, 6​ mm, 8 mm and 10 mm and a height of 30 mm, 50 mm, 60 mm, 80 mm, 100 mm, 120 mm.
  • Consists of 2 fixing supports and sectional blocks.
  • A sectional block can be turned to the corresponding face to fit the busbar.
  • The fixing support is made out of polyester reenforced with glass fibers.
  • The sectional blocks are made out of polycarbonate reenforced with fiber glass.
  • Max. working temperature: 120°C
  • Max. voltage: 1000 V
  • Used to support bars with a width of 5 mm,
  • 6 mm, 8 mm and 10 mm and a height of min
  • 30 mm.
  • Consists of busbar blocks fixed to supporting raceways.
  • By changing the distance between the busbar blocks on the raceway it is possible to adjust the phase to phase distance.
  • The fixing support is made out of polycarbonate reenforced with glass fibers.
  • Self-extinguishing UL: 94 V0
  • Max. working temperature: 120°C
  • Max. voltage: 1000 V