• The insulators are made out of polyester resin with glass fibers. 
• The standard colour is red: RAL3002. Other colors are possible on demand. 
• These insulators are used for low voltage applications up to 1000V

STANDOFF INSULATOR OR SPACING INSULATOR

• A standoff insulators is made out of polyester resin with glass fibers
  (18%-20%).
• Inserts from M6 up to M16
• Height from 12mm up to 100 mm
• Working temperature: -40°C to +130°C
• Reenforced and anti-acid version can be made on demand
• Made out of polyester resin with glass fibers
  (18%-20%).
• Max. voltage: 1000 V

COLUMN TYPE SPACING INSULATOR

• A spacing insulator is made out of polyester resin with glass fibers
  (18%-20%).
• Insert from M6 up to M16
• Height from 25 mm up to 60 mm
• Working temperature: -40°C to +130°C
• Reenforced and anti-acid version can be made on demand
• Made out of polyester resin with glass fibers
  (18%-20%).
• Max. voltage: 1000 V

BUSBAR SUPPORT

• The busbar support is used to support bars with a width of 5 mm, 6 mm, 8 mm and 10 mm and a height of 30 mm, 50 mm, 60 mm, 80 mm, 100 mm, 120 mm.
• The busbar support consists of 2 fixing supports and sectional blocks.
• A sectional block can be turned to the corresponding face to fit the busbar.
• The fixing support is made out of polyester reenforced with glass fibers.
• The sectional blocks are made out of polycarbonate reenforced with fiber glass.
• Max. working temperature: 120°C
• Max. voltage: 1000 V

• The bus bar support is used to support bars with a width of 5 mm, 6 mm, 8 mm and 10 mm and a height of min 30 mm.
• The bus bar support consists of busbar blocks fixed to supporting raceways.
• By changing the distance between the busbar blocks on the raceway it is possible to adjust the phase to phase distance.
• The fixing support is made out of polycarbonate reenforced with glass fibers.
• Self-extinguishing UL: 94 V0
• Max. working temperature: 120°C
• Max. voltage: 1000 V

PASSING INSULATOR

• The passing insulator is used for electrical connection between the internal and external parts of electrical boards
• The passing insulator is composed of tie rod, nuts, washers and two plastic pieces that fit into each other.
• Made out of polyamide PA6 with glass fibers
• Tie rod, nuts, washers: made out of white galvanized steel
• Max. working temperature: 110°C
• Max. voltage: 1000 V